压电式微滴按需喷射的过程控制和规律

微滴喷射增材制造技术中沉积微滴的大小与均匀性是影响成型件质量的关键因素.本文设计了一种用于生成均匀微滴的压电驱动式微滴喷射装置,通过压电材料带动柔性膜片振动,将液体从喷嘴中喷出生成微滴,采用数值模拟和实验相结合的方法,研究了不同控制参数下膜片振幅及其对生成微滴尺寸和均匀性的影响.研究结果表明:膜片振幅大小受到驱动电压和压电频率的共同影响,压电频率是导致膜片中心点振幅实验测量值小于理论计算值的主要原因,膜片振动会导致喷嘴内部压力发生变化从而影响微滴生成尺寸.在相同驱动电压条件下,压电频率为10 Hz时存在压电膜片振幅最大值.随着膜片振幅的增大,喷孔处液体速度和液柱长度增大到临界值时可以生成微滴,当喷孔处的液柱长度超过临界值时,会形成卫星液滴. 当膜片振幅区间在30 $\mu$m$\sim $42 $\mu $m可以稳定生成微滴,生成最小微滴尺寸为339.8$\mu$m,直径最大变化率为0.29%,相邻两微滴间距最大变化率为2.67%,生成微滴的尺寸及均匀性较好.研究结果有助于提高压电式微滴喷射装置的液滴生成质量.      

Comparative pharmacokinetic study of four major bioactive components after oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and corticosterone‐induced depressive rats

A highly selective and efficient LC–MS/MS method was developed to determine the plasma concentration of magnolol, hesperidin, neohesperidin and geniposide following oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and depressed rats. Plasma samples were pretreated by protein precipitation with methanol. Chromatographic separation was performed on an XTerra^® MS C₁₈ column using a gradient elution with a mobile phase composed of acetonitrile–0.1% aqueous formic acid. The proposed method was validated to be specific, accurate and precise for the analytes determination in plasma samples. The calibration curves displayed good linearity over definite concentration ranges for the analytes. The intra‐ and inter‐day precision of the proposed method at three different levels were all within <11.13% and the relative errors ranged from ?8.46 to 8.93%. The recovery of the four compounds ranged from 82.72 to 89.08% and no apparent matrix effect was observed during sample analysis. After full validation, the established method was successfully applied for comparing the pharmacokinetics of four components between normal and depressed rats. The results showed that the AUC and C_max of four analytes in depressed rats were significantly different from those in normal rats and might provide helpful information to guide the clinical use of Zhi‐Zi‐Hou‐Po to treat depression.     

Synthesis and Characterization of Phenolphthalein‐Containing Sulfonated Poly(arylene ether phosphine oxide)s by Direct Polycondensation for Proton Exchange Membrane

A series of novel phenolphthalein‐containing sulfonated poly(arylene ether phosphine oxide)s (sPAEPP) with various sulfonation degrees were synthesized by direct polycondensation. The structure of sPAEPP was confirmed by ¹H‐NMR, ¹³C‐NMR, and IR spectroscopy. The high‐molecular weight of these polymers was determined by gel permeation chromatography (GPC). The transparent, tough, and flexible membranes could be achieved by solution casting. The macroscopic properties and microstructure of the obtained membranes were investigated in detail. The results showed that these sPAEPP membranes displayed excellent properties in terms of swelling, proton conductivity, and methanol permeability. For example, sPAEPP‐100 membrane exhibited an appropriate water uptake of 33.1%, a swelling ratio of only 11.7% (lower than 20.1% of Nafion 117), a proton conductivity of 0.11 S cm^?1 (similar to that of Nafion 117) at 80 °C, and a methanol permeability of 4.82 × 10^?7 cm² s^?1. Meanwhile, it also presented outstanding oxidative stability. Atomic force microscope (AFM) micrographs showed that the hydrophilic domains of the sPAEPP‐100 membrane formed connected and narrow ionic channels, which contributed to its high proton conductivity and good dimensional stability. As a result, sPAEPP‐100 membrane displays excellent application prospect for fuel cells. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1097–1104     

差异化需求下考虑患者预约行为的医疗服务供需匹配方法

如何根据患者的差异化需求,撮合医生与患者双方形成合理有效的医疗服务供需匹配,是医疗服务运作管理中重要的研究问题。本文针对医疗服务中医生与患者的实际需求,提出了一种考虑患者预约行为的匹配决策方法。在该方法中,首先依据患者的预约行为及特征分类;然后,通过计算不同情形下医患双方的差异度,获得了医患双方的满意度矩阵;在此基础上,提出了匹配预约患者与医生的E-HR算法,并进一步构建了匹配剩余患者和医生的多目标优化模型,通过模型求解得到最优匹配结果;最后,通过算例说明了本文提出方法的可行性和实用性。     

石墨氮化碳光催化剂的制备及其改性研究进展

石墨氮化碳(g-C3 N4)是一种可见光响应的非金属半导体材料.g-C3 N4具有廉价易得,物理化学性质稳定,无毒无污染等优点,在环境净化和能源催化领域具有良好的应用前景.然而,体相g-C3 N4存在比表面积小,可见光吸收能力差,光生电子和空穴复合效率高等缺点,从而严重限制了其在实际中的应用.本文在概述了g-C3 N4的结构、特性及制备方法的基础上,着重归纳了g-C3 N4的改性方法,其中包括元素掺杂、形貌调控、贵金属沉积等改性手段的研究进展.最后,本文探讨了g-C3 N4光催化反应机理,以及对g-C3 N4在水体环境净化领域的研究进行了展望.     

SiO2@Gd2O3∶Tb3+核壳微球的可控合成及发光性能研究

采用简便的尿素辅助沉淀法将Gd2O3∶Tb3+成功包覆在二氧化硅微球表面合成了尺寸均匀的球形SiO2@Gd2O3∶Tb3核壳发光材料,解决了稀土发光材料普遍存在的形貌可控性差和颗粒尺寸不均一等问题.利用XRD、SEM、红外光谱和荧光光谱等表征测试了样品的形貌、结构和发光性能.SEM照片和尺寸分布图显示,SiO2@Gd2O3∶Tb3+粒子呈现均匀球形形貌,分散性良好,粒径约(608 +18) nm.XRD图谱分析表明,600℃煅烧后,壳层Gd(OH)3CO3完全转变为立方相Gd2O3,结晶性良好,无杂相生成.同时,结合红外光谱推测了SiO2@Gd2O3∶Tb3核壳微球的形成机理,并得出Gd2O3∶Tb3+壳层主要以Si-O-Gd键形式连接在二氧化硅微球表面.在240 nm紫外光激发下,SiO2@Gd2O3∶Tb3核壳微球呈现绿光发射,其中,位于540 nm处的主峰归属于Tb3+的5D4→7F5能级跃迁.不同Tb3掺杂浓度下的发射光谱表明,当Tb3+掺杂浓度为4mol;时,SiO2@Gd2O3∶Tb3+核壳微球的发射强度达到最大值,寿命为1.55 ms,色坐标位于绿色区域,展现了良好的绿光发光性能.     

平行平板横向剪切干涉仪装调误差的矫正方法研究

对平行平板双光路横向剪切干涉仪的装调进行了研究,提出了一种矫正两个平行平板之间角度误差的方法.输出激光的波前采用Zernike多项式拟合,经过理论推导,发现两个方向差分波前求解出的倾斜像散之差与平行平板的角度误差存在线性关系,利用两个方向倾斜像散之差来矫正两个平行平板之间的角度误差.在平行平板横向剪切干涉仪的装调过程中使两个方向差分波前的倾斜像散之差为零即可以使两个方向的平行平板之间的角度误差值为零.进一步地从实验上证明了这个线性关系,对于所用的实验系统,当离焦像差为-3.224 7±0.001 8,两个方向差分波前的倾斜像散之差波动范围为±2.0×10^-3时,平行平板的角度误差可以控制在8.82″之内,高阶像差对平行平板的角度误差调节精度的影响约为1.63″.该方法具有装调简单、精确度高,易于流程化操作的优点.     

光电化学技术应用于抗氧化分析的研究进展

在新陈代谢过程中, 机体会产生大量以自由基为主要形式的氧化活性物质, 而抗氧化剂可以通过电子转移的方式捕获并中和自由基, 从而有效抵御自由基引起的细胞损害, 以保障和维护人体健康. 食品作为人体外源性抗氧化剂的重要来源可以有效补充因体内代谢及体液排出而损失的抗氧化物质, 因此对食品中抗氧化物质消除自由基的能力即抗氧化能力的测定和评价具有重要意义. 光电化学技术作为一种简单快捷、 低成本、 低背景且高灵敏度的测定方法, 能够有效克服光学法、 色谱法和电化学法等传统测试手段在抗氧化容量分析中的不足. 本文综述了基于半导体及其复合材料的光电化学传感平台的构建及食品体系抗氧化容量分析的研究进展, 评论了多种检测体系的特点并对其研究前景进行了展望.     

吉林大学化学学院研究生课程思政的多维度构建与探索*

研究生课程思政的建设影响着研究生的培养质量,关乎着能否实现立德树人这一人才培养的根本任务。介绍了吉林大学化学学院立足学科特点,在研究生课程思政建设方面取得成功的经验,并对未来的课程思政建设方向进行了探讨。     

GaAs基980 nm高功率半导体激光器的研究进展

GaAs基980 nm半导体激光器在材料加工、通信和医疗等领域有着重要应用。应变量子阱结构的出现提高了GaAs基半导体激光器的转换效率、输出功率和可靠性。本文综述了高功率GaAs基量子阱激光器历史发展,介绍了高功率半导体激光器的外延结构、芯片结构和封装结构设计,重点阐述了影响高功率GaAs基量子阱激光器光电性能、散热和实际应用的问题。针对以上问题讨论了相应解决方案及研究成果,并指出了各个方案的不足之处和改进方向。最后,总结了高功率半导体激光器的发展现状,对高功率半导体激光器发展方向进行了展望。